NL series CO2 laser cutting engraving machine

CO2 laser cutting engraving machine

This series is specially for cutting non-metallic material; the moving parts adopt imported high precision straight balanced Guide way and high speed stepping subdivisive electromotor; inset-in computerization control system. DSP figure with high speed disposing technology, offline operation, humanized operating interface. With Max saving space 28M for processing files, and the laser power and engraving/cutting speed can be controlled at any discretion. It is the best choice of the non-metallic laser cutting and laser processing industries.

Machine Advantage

1. High cutting precision, no burn, no yellow mark；

2. Easy/friendly operation system;

3. Perfect optical system;

4. U.S.A step motor & driving system with high precision synchronization system to make sure fast cutting speed and high precision;

5. Interactive three kinds of data( U disk ,PC ,internet);

6. software support multiple formats: AI, PLT, BMP, JPG, DXF, DST, seamless compatibility CorelDRAW, CAD, PHOTOSHOP, and other graphic software, easy operation;

7. A LAN interface, two-way communication, to improve transmission speed and accuracy; allows a computer to control up to 254 laser equipment, greatly reduces the user cost of investment;

Applicable Materials

This kinds of model apply widely to fabric, leather, PU, wood, MDF, electronic parts, paper, acylic.......ect.

Applicable Industry

This kinds of model apply to cloth,leather, tabuectoy,electronics and electronic appliance,model,crafts gift, the advertising,package printing,paper products industry.

Model	NL-640	NL-960	NL-1080	NL-1390
Laser type	CO₂ LASER
Cooling method	Water cooling
Laser power	80W-300W(Optional)
Cutting speed	0-800mm/s
Engraving speed	0-1500mm/s
Repeat positioning accuracy	±0.05mm
Processing range	600x400mm	900X600mm	1000x800mm	1300x900mm
Power supply	1PH+1 AC 220V 15A 50/60HZ
Power consumption	1500-300W
Environmental requirements	Temp 15℃-35℃, Humidity30%-80%（No condensation）

What is the processing effect of CO2 laser cutting machine?

Speaking of laser cutting processing, the most common one on the market is CO2 laser cutting As a traditional laser processing machine, CO2 laser cutting is convenient for major processing companies and provides convenient and faster processing methods How CO2 laser cutting is achieved...
Reasons and solutions for CO2 laser cutting without light

Causes and solutions for CO2 lasers cutting without light, sometimes the laser will fire, but it won t hit the mirror or lens (and therefore won t hit your material) If you visually see the laser tube firing, but no laser hits your material, try an alignment test...
5 Factors Affecting the Quality of Metal Laser Cutting and Solutions

Five factors and solutions that affect the quality of metal laser cutting The laser cutting section will form vertical lines The depth of the lines determines the roughness of the cutting surface The shallower the lines, the smoother the cutting section Roughness affects not only the appearance of the edge, but also the friction...
Analysis and solution of good and bad effect of metal laser cutting

The use of laser to cut sheet metal is gradually becoming popular in the processing industry Most users compare the four measurement indicators of the incision and section (the width of the incision cut, the inclination of the incision, the slump of the incision, and the roughness of the cutting surface) Familiar with other quality metrics...
How to solve the problem of poor laser cutting machine effect and large smoke and dust? look here

How to solve the problem of poor laser cutting machine effect and large smoke and dust? Look here, according to the product usage strategy disclosed by the laser cutting machine manufacturing industry, if you want to play the role of the laser cutting machine as much as possible, improve production capacity and efficiency, users can use the following aspects:...